FAQ

Insulation is one of the most important measures to take when boosting the energy efficiency of a building. No other measure can save as much energy for heating. 

Manufacturing the insulating materials consumes much less energy than the materials ultimately save. The energy used to manufacture insulation materials is marginal compared to the energy saved in a dwelling over a period of 20 to 30 years. As such, the energy consumed in manufacturing insulation does not constitute an argument against energy retrofitting, but it can very well influence the choice of insulating material. According to Klimabonus State aid criteria, environmentally friendly insulation requires little energy to produce.

The Klimabonus programme provides substantial subsidies for the use of environmentally friendly insulation.

When improving building energy efficiency, insulation measures have the highest priority. No other measure can save as much energy for heating.

Several studies demonstrate that the production of insulation materials consumes much less energy than is saved later. Even with 30-centimetre thick insulation materials, such as polystyrene, the production energy required is already amortised after about three years.

No. Boreholes drilled for surface geothermal energy cannot under any circumstances trigger an earthquake. Nor has a geothermal probe ever been observed to have been damaged by an earthquake.

Under the new rules for the installation of geothermal probes, damage can be practically excluded if the rules are carefully observed.

Yes, it is possible to recycle these batteries. It is regulated by the amended Law of 19 December 2008 on batteries and accumulators and waste batteries and accumulators, which enacts European Directive 2006/66/EC into Luxembourg law. This directive requires at least 50% of the weight of batteries other than lead-acid and nickel-cadmium types, i.e. lithium-ion batteries, to be recycled.

The components that are currently most attractive for recycling are cobalt, nickel, copper and aluminium. In the medium term, the lithium recycling rate should improve to ensure supply.

For more information or instructions relating to the recycling of these batteries, which are considered to be industrial accumulators, please contact either SuperDrecksKëscht or the Ecobatterien asbl association.

To assess the environmental impact of batteries, it is necessary to take into account the rare and partly at-risk resources (lead, lithium, etc.) consumed, their origins and the mix of electricity used in the production of the batteries.

Lithium-ion batteries are made of cobalt, nickel, copper, aluminium and lithium, as well as other materials. Among these materials, the availability of lithium in particular is a hot topic. Over the short term, reserves are sufficient to guarantee the manufacture of the batteries; nevertheless, it will be necessary to improve the recycling capacity of lithium to ensure supply over the medium term.

Analysis of the environmental impact of these batteries is currently a major topic of research. Although there have already been positive developments in terms of cost effectiveness, performance and the environmental impact of batteries, they are still under intense development and significant progress is expected in the near future.

Yes, in general it is possible to repair them, with the exception of broken glass.

Currently, most panels destined for recycling are faulty panels or panels that have been damaged during transport. Where possible, therefore, repair is the best method of giving panels a second life, thereby extending the life cycle of panels that would otherwise be recycled.

According to the law of 9 June 2022 on waste electrical and electronic equipment, the producer is responsible for the collection and processing of photovoltaic panels.

Producer means any natural person or legal entity who manufactures photovoltaic panels in Luxembourg or initially imports them onto the Luxembourg market. Any person established in another Member State or in a third country who, on a professional basis, supplies photovoltaic panels directly to a user in Luxembourg is considered a producer. In practice, in the majority of cases, this is the installer of the photovoltaic plant in Luxembourg.

Possibilities for owners to dispose of their old photovoltaic panels 

For photovoltaic panels put on the market before 13/08/2005 :

• in case of replacement of the photovoltaic panels, the take back of the old panel is free of charge and must be ensured by the company supplying the new equipment
• in case of dismantling of the photovoltaic panel (non-replacement of the panel), the removal by a professional collector is done against payment by the user

For photovoltaic panels placed on the market after 13/08/2005 :

• free take-back by the producer who bears the costs of collection and recovery of the photovoltaic panels. 

In general, all photovoltaic panels are recyclable.

Indeed, there are risk-free procedures for silicon-based panels as well as for thin-film panels containing cadmium. Moreover, recycling is regulated by the European Directive 2012/19/EU on waste electrical and electronic equipment, which is transposed into national law by the law of 9 June 2022 on waste electrical and electronic equipment: this framework currently requires at least 80% of the mass of a photovoltaic panel to be prepared for reuse or recycled, and 85% of the mass to be recovered.

The recycling rate of photovoltaic modules is nevertheless close to 100%, considering that the modules are generally composed mainly of glass, aluminium and other metals. Net modules usually contain very limited amounts of synthetic materials, such as silicon or other minerals. However, it is technically possible to recycle these elements, even if the processes for extracting them are not yet cost-effective. Thus, these materials are currently mainly used for thermal recovery.